* User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Who's Online

  • Dot Guests: 31
  • Dot Hidden: 0
  • Dot Users: 0

There aren't any users online.

* Recent Topics

Who is turning 50? by stuuuz
[Yesterday at 10:35:05 PM]


Camber adjustment by Saville
[Yesterday at 06:03:26 PM]


Door hinge check spring by Ron
[August 18, 2018, 01:47:07 PM]


Old Bedford owner. by wendyh
[August 13, 2018, 07:09:37 AM]


Bedford J1 by druid
[August 09, 2018, 11:15:46 PM]


Barra powered Bedford van by wendyh
[August 09, 2018, 06:05:20 PM]


Selling my Campervan Project. by IWander
[August 07, 2018, 07:53:46 PM]


EFI fuel tank by Betty Bedford
[August 06, 2018, 04:38:44 PM]


Australian owners manual for CF Bedford by wendyh
[July 29, 2018, 09:37:15 PM]


Daily Post by outriding
[July 20, 2018, 06:04:56 AM]

Author Topic: Ignition housing  (Read 241 times)

0 Members and 1 Guest are viewing this topic.

Offline baz

  • Gumbie
  • *
  • Location: sydney
  • Posts: 20
    • View Profile
Ignition housing
« on: May 14, 2018, 03:41:00 PM »
Wondering if it is possible to remove the alloy ignition housing. Can the  pins holding the 2 pieces of the housing be removed or is drilling them out the way to go?

I would like to buy a complete ignition setup if anyone has one for sale. I'm over starting the van each time with a screwdriver in the wiring cap.

Offline Hobbit

  • Just streetable
  • ****
  • Location: Goulburn NSW
  • Posts: 366
    • View Profile
Re: Ignition housing
« Reply #1 on: May 15, 2018, 01:07:07 AM »
G'day Baz.

Yes, you'll have to drill the two shear head clamp bolts to remove the ignition switch. The hard part is persuading the bolts to turn. Firstly, remove the plug connector from the switch, then drill a 3mm - 6mm hole in the centre of the bolts and use a fluted or tapered screw extractor to remove them. Without an extractor, shallow drilling towards the rim of the shear bolt can be used to drive the bolt round with a hard point punch. This is how I removed mine. Allen key head bolts can be used when refitting the switch.

You'll probably have to drill diagonally into the locking pin on the side of the housing to pull the splined pin out enough to remove the barrel. (See pic 3) If you can't find a Land Rover switch to suit, ask a locksmith, they should be able to supply a new barrel.

Here's some more info from the Bedford CF Org forum
https://forum.bedfordcf.org/viewtopic.php?t=2432

« Last Edit: May 15, 2018, 02:27:26 AM by Hobbit »

Offline baz

  • Gumbie
  • *
  • Location: sydney
  • Posts: 20
    • View Profile
Re: Ignition housing
« Reply #2 on: May 15, 2018, 11:17:44 AM »
Hi Hobbit,
Many thanks for your reply. great pics too. You saved me from a serious error involving using an angle grinder as a solution to the problem.


Offline Hobbit

  • Just streetable
  • ****
  • Location: Goulburn NSW
  • Posts: 366
    • View Profile
Re: Ignition housing
« Reply #3 on: May 15, 2018, 09:42:56 PM »
Alternatively, a dremel with a cutting disk could be used to cut a slot across the top of the shear bolt allowing you to use a flat head screw driver. There's a thread on  BUGA regarding this same topic.  http://www.buga.com.au/index.php?topic=8753.0

There's another thread on here about the Land Rover Defender door lock barrels being the same as the Bedford's.  http://www.buga.com.au/index.php?topic=7109.0

I don't know if the Land Rover Defender ignition switch is a good replacement, though. It looks similar, with same type of steering lock, but the key end is longer. You'd have to check if the diameter of the bracket would fit the Bedford column to see if it could be adapted. There's one for sale on ebay, from Southport Auto Recyclers in QLD. (07) 5571 0699

https://www.ebay.com.au/itm/LANDROVER-DISCOVERY-IGNITION-BARREL-KEY-IGN-KEY-HOUSING-SWITCH-04-94-02/172555082424?hash=item282d159ab8:g:bBgAAOSwdGFYthHc

For spare parts, you can always call Rob at Bedford manor, Loganholme 0402989175.

 

anything