User Info
Who's Online
Recent Topics
Cf Bedford for sale by wendyh
[February 10, 2025, 05:29:09 AM]
Introductions by moose
[February 09, 2025, 06:58:40 PM]
CF 350 Breaks conversion by greasey monkey
[November 19, 2024, 10:28:23 PM]
Advise on raising the rear end of a CF350 Motorhome. About 3.5T by johnxb351
[August 09, 2024, 08:17:08 AM]
Sale of 1977 Bedford Motorhome by johnxb351
[August 06, 2024, 08:27:12 PM]
173 extractors by kylee dingo
[April 07, 2024, 02:55:17 PM]
lowering my bedford cf by Ratbox
[October 07, 2023, 07:59:56 PM]
Adjustable Upper Control Arms by Saville
[August 22, 2023, 11:35:43 AM]
202 red to 202 black Carby engine by johnxb351
[June 21, 2023, 06:33:35 PM]
CF CLUTCH PEDAL by johnxb351
[June 18, 2023, 02:58:15 PM]
|
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JohnnyJ
1
« on: November 12, 2012, 06:50:37 PM »
Thanks Rossie,
After 3 failed axles in 2 diffs, I am trying to get away from buying second hand axles that have already had some 30 years use & may already be stressed.
2
« on: November 12, 2012, 10:57:40 AM »
Hi,
I was going to get a new set of axles made for my 76 model SWB & everything was going ok until I told them the dimensions (mainly PCD).
Does anybody know where I can have new Bedford axles made & how much?
3
« on: November 07, 2012, 07:06:21 PM »
Thanks again Vandee.
4
« on: November 06, 2012, 05:30:58 PM »
Thanks Vandee, That is them.
5
« on: November 06, 2012, 10:48:01 AM »
Are they 825mm from the back of the hub?
Thank you for your trouble.
6
« on: November 06, 2012, 02:20:01 AM »
Thanks Vandee, the length of both sides would be great.
7
« on: November 05, 2012, 06:26:55 PM »
Thank you
8
« on: November 05, 2012, 08:17:37 AM »
Hi,
Ben was unable to get the measurements (thanks anyway Ben). Does anybody else know how long the passenger side axle is?
9
« on: November 04, 2012, 08:09:59 AM »
Thank you Ben
10
« on: November 04, 2012, 07:40:12 AM »
Thanks for the offer & the info Resteroid, but you too far away for me to pickup.
I am trying to have a pair of axles made new, as over the years I have broken several axles & replaced several expensive rear bearings, & I can only replace them with axles 30 odd years old,so I thought new axles would alleviate the problem,but I am having trouble getting the passenger side axle out to measure the length. Has anyone got a passenger side axle (21 tooth spline, 35mm bearing journal, 6 hole backing plate) laying around they could measure for me?
I considered putting a different diff in but it appears to me that it is very labour intensive & I am not too mechanically minded, unless there is one that is relatively "easy" to fit.
|
Guests: 447
Hidden: 0
Users: 0
Show Posts