BUGA Community

General Category => CF Bedford Chat => Topic started by: Stevo on June 28, 2017, 10:47:30 PM

Title: Advise on raising the rear end of a CF350 Motorhome. About 3.5T
Post by: Stevo on June 28, 2017, 10:47:30 PM

Its not that I mind the power steering effect of a heavy motorhome body on the back of the CF-350.
But I'd like to even up the heavy assed profile a bit. I was thinking of fabricating longer rear spring hangers or airbags on top of the rear springs. But surely that would just raise the front the same height because the weight distribution is still the same?
All ideas appreciated. Looks like it needs a 3"  lift. How would one go about this? :o

Title: Re: Advise on raising the rear end of a CF350 Motorhome. About 3.5T
Post by: Zeeman on June 29, 2017, 09:25:43 AM

Get your leaf springs reset to the desired height, any decent spring place should be able to do it.

Title: Re: Advise on raising the rear end of a CF350 Motorhome. About 3.5T
Post by: johnxb351 on August 09, 2024, 08:17:08 AM

 Did you ever raise the rear of your  cf 350  . if what did you do