BUGA Community

Technical => Electrics, Audio and Security => Topic started by: johnb44 on March 05, 2016, 04:12:37 PM

Title: replacement ignition assembly
Post by: johnb44 on March 05, 2016, 04:12:37 PM

i have just fitted an ICE electronic ignition to my beast and while cranking I lost power the ignition assembly fell apart at the rear  :-[ what have you used to replace the assembly or over come the problem. thanks
jb

Title: Re: replacement ignition assembly
Post by: rumax on March 05, 2016, 10:11:15 PM

Well it depends if you have a steering lock or not. If not, fit a new switch where the original one is, if not, try in the dash....or hidden somewhere. would make it even harder to steel!

Title: Re: replacement ignition assembly
Post by: johnb44 on March 06, 2016, 07:39:39 AM

thanks I do have the steering lock will see what the parts shops have today  ;)

Title: Re: replacement ignition assembly
Post by: johnb44 on March 06, 2016, 04:26:18 PM

i bought a narva 4 way ignition switch and made up a bracket to fit where the original one went a bit fiddly but worked ok sorry didn't take pics when I pull it apart again I will  8)