BUGA Community

Technical => Maintenance => Topic started by: aussieneil on February 29, 2016, 11:52:09 AM

Title: Extractors for 6 cylinder
Post by: aussieneil on February 29, 2016, 11:52:09 AM

After cracking two cast iron exhaust manifolds, I'm considering going down the extractor path. Obviously standard Holden 6 extractors will fit the engine, but do they have a suitable exit angle and location for bolting into a CF? Any experiences or wisdom will be much appreciated!

Title: Re: Extractors for 6 cylinder
Post by: rumax on March 01, 2016, 06:53:24 PM

I have extractors on mine, with no issues.

Title: Re: Extractors for 6 cylinder
Post by: LS120 on March 01, 2016, 06:57:31 PM

same here have had 2 set's on mine. also if you put a 200 - 250mm long coby in you get a nice sound as well
 ;D

Title: Re: Extractors for 6 cylinder
Post by: Bas / NZ on March 02, 2016, 09:12:41 PM

No Problems here, fits well, and you will notice a power gain,,,