BUGA Community

General Category => CF Bedford Chat => Topic started by: Yoshi on February 10, 2015, 01:13:02 AM

Title: stud pattern
Post by: Yoshi on February 10, 2015, 01:13:02 AM

Hi Guys,

would the stud pattern on a holden HZ be the same as ours???

I'm guessing no. anything else out there that is the same?

Cheers

Title: Re: stud pattern
Post by: BusyKiwi on February 10, 2015, 05:54:38 AM

There is nothing the same as CF Bedford

Title: Re: stud pattern
Post by: AndrewOC on February 10, 2015, 09:09:35 PM

CF single wheel equipped (18/20cwt) is five stud, 6" PCD.  This was a carry over from CA Bedfords and the 'E' model (1953- 57) car that they were based on.

Dual wheel (35cwt) is six stud, 170mm PCD, 18mm studs.  Do a Google search for 6 stud, 170mm pcd; it comes up with some interesting possibilities that I haven't been able to test.

enjoy!
AndrewOC

Title: Re: stud pattern
Post by: Bas / NZ on February 11, 2015, 05:38:23 AM

There is a Jumbo Dual wheel van in Auckland running DODGE RAM 3500  wheels, he said the bolted straight on?