BUGA Community
Technical => Exteriors and Interiors => Topic started by: vanpyre on May 21, 2014, 12:20:11 AM
-
High guys question if thats ok does anyone now where in west aust i can buy foam for the interior panels of the van without spending a 1000 bucks
Any help or advice is appreciated cheers Ian
-
id suggest make them yourself. you can use all sorts of free materials.
i just picked up 50 plywood pallets the company said i can have all the old pallets i have i rough counted 1000!
im going to build a geodesic dome out of pallet timber its going to be really cheap.
ben
-
ive got all the wood thats the easy bit but the foam padding for under the material is the hard part
-
How thick do you need the foam?
I used carpet underlay to line my old white van.
All sorced from a carpet layer,( end of rolls, and slightly damaged edges etc)(all new though)
I contact adhesed it to the ply pannels, then streched the crush velvet
Over it n stapled it along the back.
Worked great.
And was cheap as, cost $50 to do the whole van.
-
Hi Vanpye contact me 0448 993 742.....