BUGA Community
Classifieds => For Sale => Topic started by: Sammy on April 28, 2014, 10:02:09 PM
-
OK so as you know i'm putting a V8 into my Bedford so I don't really have a use for any of the standard bits that have been removed when the 173 came out.
I'll list all this stuff here, if no one is keen i'll eventually list them on ebay.
Basically make me an offer, or let me know what you want and i'll let you know a price if you don't want to make any offer!
everything is in AS IS condition, I'm happy to let you know any specifics about the parts but I only drove the car home then removed everything so my experience is limited.
Item 1 - Complete wiring loom, including dash, fuse box (with 2 covers), ignition switch and indicators.
I know the fuel gauge and blinkers were funny, not sure if this is an earth issue or not. Also speedo does not work.
(http://www.oldholdens.com/images/cars/cf%20bedford/old%20driveline/P1120039.JPG)
(http://www.oldholdens.com/images/cars/cf%20bedford/old%20driveline/P1120040.JPG)
Item 2 - Air Cleaner, with firewall mount and carby hose.
(http://www.oldholdens.com/images/cars/cf%20bedford/old%20driveline/P1120041.JPG)
Item 3 & 4 - Fan and water pump pulley
(http://www.oldholdens.com/images/cars/cf%20bedford/old%20driveline/P1120042.JPG)
Item 5 - Distributor and Coil (points - non electronic) including plug leads.
engine ran perfectly smooth and never missed a beat as far as spark goes!
(http://www.oldholdens.com/images/cars/cf%20bedford/old%20driveline/P1120043.JPG)
Item 6 & 7 - Stromberg Carburetter & exhaust manifold.
This carby was great, even without the choke, you could start it from cold with a few pumps of the pedal and it drove beautifully! colour of the spark plugs also indicates this carby wasn't too lean or rich either!
the exhaust manifold has a broken flange stud as you can see.
(http://www.oldholdens.com/images/cars/cf%20bedford/old%20driveline/P1120044.JPG)
Item 8 & 9 - PCV hose and Steel Fuel/Vacuum Hoses.
(http://www.oldholdens.com/images/cars/cf%20bedford/old%20driveline/P1120045.JPG)
I will be happy to post these items at buyers expense, or you can pickup from East Maitland area if you prefer!
Payment options, Paypal, bank deposit, or cash on pickup.
-
Do you have any of the old heater parts?
-
Yeah Mez i do and thats one part i need to keep sorry!
i've listed everything i either don't want or haven't already gotten rid of.
only thing is the tailshaft, but i figure its not that easy to post and probably not alot of interest .... the yoke is stuff too.
-
No worries Sammy, thanks anyway. I'm hoping i may have solved my heater tap problem with a bit of "left of centre" thinking!! Time will tell.
-
good luck dude :)
-
Item 2 has been sold.
-
Also for sale is the original accelerator cable to suit 173 stromberg carby - in good working order.
-
all this stuff has been put on ebay, if these listing don't sell this stuff will most likely get thrown out.
http://www.ebay.com.au/itm/121356851823 (http://www.ebay.com.au/itm/121356851823)
http://www.ebay.com.au/itm/121356851227 (http://www.ebay.com.au/itm/121356851227)
http://www.ebay.com.au/itm/121356848298 (http://www.ebay.com.au/itm/121356848298)
http://www.ebay.com.au/itm/121356846990 (http://www.ebay.com.au/itm/121356846990)
http://www.ebay.com.au/itm/121356844745 (http://www.ebay.com.au/itm/121356844745)