BUGA Community

Technical => Exteriors and Interiors => Topic started by: Jimi on October 11, 2013, 09:10:42 PM

Title: dash
Post by: Jimi on October 11, 2013, 09:10:42 PM

How to installs custom cab dash ,with original cluster,do you remove from steel frame ,or cut the four bolts off to move back.???or something else.

Title: Re: dash
Post by: mezzmo on October 12, 2013, 09:20:17 AM

You have to remove the front and rear of the original dash then screw the panel to the back of the CustomCab Dash - pretty easy job really, the hardest part is cutting out the hole in the Custom Dash to make it look sort of original.

Hope this helps

Mezz

http://www.buga.com.au/index.php?option=com_gallery2&Itemid=8&g2_itemId=45427 (http://www.buga.com.au/index.php?option=com_gallery2&Itemid=8&g2_itemId=45427)

Title: Re: dash
Post by: Bas / NZ on October 12, 2013, 04:21:06 PM

Have the fitting instructions here somewhere, could scan and upload if needed.