BUGA Community
Classifieds => For Sale => Topic started by: willo on May 11, 2013, 07:59:15 AM
-
Hi guys,
I was going to go down the whole update of my 202 with blue 3.3 but did the v6 swap instead.
Now I've got holden 6 bits I need to sell.
I live in Lismore NSW and will put them in my ute and drop them to you within say 100k radius.
How you get them off the ute is your issue though.
Here is the list
- red 202 and Beddie Trimatic. Genuine 16000k since reconditioned as a Gem motor. Auto was reconditioned at the same time. This was in 1986!!! I got it with 8k and put another 8k on it. I got hardened seats in the head and got it reco'd before I put it on the road too $300
- red extractors. solid but not perfect $50
- blue 3.3 x2 NOTE. This is what I was told. I have not pulled apart to check. one is standard bore with mild port job. Second is +60thou, HC pistons, 4 cyl rods, balanced, mild cam, good flowed head, hardened valve seats. This is a lucky dip because I haven't got into them and they are as I bought them. I can see the porting in the heads and that looks good but not internals. So, $150 for both.
- Blue inlet manifold with Falcon 2 BBL carby. $100
- TH700 4 speed auto out of a VP V6. Included the Dello adaptor plate for fitting to a holden 6. $350.
Anyone interested PM me and I'll get back to you.
If no interest I'll be putting on Gumtree or something soon.
Cheers
Neil
-
hey will
marky here im in eureka NNSW
my ph number is 0426897 582