BUGA Community

Technical => Driveline => Topic started by: Cellardoor on November 17, 2012, 12:21:25 PM

Title: Are these transmission mount bushes?
Post by: Cellardoor on November 17, 2012, 12:21:25 PM

Hi
I have a holden transmisson and 253 in the beddie, the road worthy states that I have to replace the Gearbox mount bushes. I wasn't present at the road worthy so I'm guessing they're the rubbers in the image.
 I can find the mount online but can't seem to find these bushes online anywhere.

do they go by another name? Any help appreciated.

cheers

Title: Re: Are these transmission mount bushes?
Post by: MaTTe on November 17, 2012, 05:35:20 PM

The gearbox mount is the piece of steel with the angle, that has a rubber connection between the two.
You have rubbers sitting between the mount and the gearbox aswell.
I advise taking them off and taking them into a GOOD parts shop to have the matched

Title: Re: Are these transmission mount bushes?
Post by: Merlin on November 17, 2012, 09:02:11 PM

take those rubber inserts between the mount and the trans out and just make up some steel bosses the same thickness and fit them ,you dont need 2 insulators/mounting rubbers in the same place   Cheers Neil

Title: Re: Are these transmission mount bushes?
Post by: MaTTe on November 17, 2012, 10:12:51 PM

A very good point made there Neil
Even get a bit of flat bar to put between the cross member and the mount to raise it up to the height its currently sitting at

Title: Re: Are these transmission mount bushes?
Post by: Cellardoor on November 25, 2012, 09:41:10 AM

Thanks guys