BUGA Community

Technical => Exteriors and Interiors => Topic started by: Bullstik on September 21, 2008, 08:40:23 PM

Title: window removal
Post by: Bullstik on September 21, 2008, 08:40:23 PM

is there an easy way to remove the side and back windows.
I know you pull out the rubber wedge from the outside then thats about it after that, any info would be great thanks

Title: Re: window removal
Post by: Marishka on September 21, 2008, 08:50:43 PM

hi, get someone on the inside and push them in,
thats the easiest way if found.
i made up a special tool to reinstall the outer rubber strip,
im still trying to find it to post pictures of the instalation procedure.
marty

Title: Re: window removal
Post by: Bullstik on September 21, 2008, 09:00:10 PM

thanks marty, i'll give it ago. My rubbers are abit hard hope i dont break them, maybe i should just cut the rubbers away and get new ones later.

Title: Re: window removal
Post by: BusyKiwi on September 22, 2008, 08:08:36 AM

The windows are toughened or laminated, not easy to break.
Just start pushing (on the inside) from a corner, once it starts it's easy.

If it seems really stuck, as if glued in, run a screw driver around the outside rubber (steel side not glass side) this will help break the sealer/glue bond