BUGA Community
General Category => CF Bedford Chat => Topic started by: hammers_spanners on August 11, 2008, 05:27:50 PM
-
Gday All
We will be opening the Bedford CF Shop to help fund future growth of our community. The shop will sell common items that we can buy in bulk and resell to our members at discounted prices.
I would envisage items like the Disc Brake conversion kit, Ball Joints, Wheel Bearings and other harder to get parts will be available.
Please post any items you think we should look at marketing. Maybe Arron and Brad can put their ranges of windows and fiberglass parts, respectively, into the shop??
Craig
-
coffee mugs...........must have cookie... :P :P :P :P ;D
-
didnt sell eh?? crazy..
the guy obviously wants more than that for it..
ben
-
didnt sell eh?? crazy..
the guy obviously wants more than that for it..
ben
What you talkin about fool?
-
Front end parts.
Ball Joints
Tie Rod Ends
Bushes
C/over Steering Rack
C/Over complete Front End with or without disc conversion
-
Are these the available choices now?
-
What do you need?
-
hmm that was a reply to a different post.. maybe i stuffed up? i usually have about 12 tabs open at once so could have.. not sure what post it was supposed to reply t o now lol..
oh nah it was for a ebay post.. hmmmm opps..
ben
-
Ben I want some of what you're on!! Does it make you very happy? ;D
-
I'd be interested in how much a change over front end would be with disc conversion (like mine) would be
-
Dashes, Flares, Door handles, Rubbers (ohh rubbers...that would be good???) (for bedfords...rubbers...for bedfords:) lol). Umm what else.....hmmmm.....Can ya get like sound proofing stuff bulk which would be cheaper, but good stuff??
Dunno there is a whole list of stuff i want...and need, but day at a time, and most unlikely to be worth carrying multiples off.
-
Cant help with the easyrollers stuff,but I got hold of pigs(oinks) about his flares and spoilers and gave him a link for photos and prices of his gear and he is on to it soon. :)
-
Tail light lenses would be good. I have the moulds for the Easy Roller, 1pce tailgates, (lge and small window), side lift up door,
Who's gunna be in control of the shop and where wil it be?
-
The shop will be an extension of this site but with its own web address, so we can hopefully broaden our reach.
It will be administered by the Moderator group with all profits going to BUGA to grow our community. I would hope to have banners made for when we have gatherings, stickers printed etc.
Anyone who wants to sell Bedford related items will be asked to supply them at an agreed rate.
The admin side will be setout soon.
-
yes this is what we need, also over head consoles & a custom dash range too, make sure there is power steering kits.
-
Hammers,
Any progress on this front?
Would be a good addition to the site, the shop would survive on the demand from this site alone!
Get a wriggle on ;)
Jock
-
JD I hope to have it running in the New Year. Being ill has somewhat slowed the progress.
So far I have the following items to be included;
Front End - complete change over with new ball joints, bushes etc cleaned and painted reco rack
Fiberglass - Ben is making a range of products spoilers, flares, bonnets and part panel replacemnets
Engine - Engine dress up and performance parts also rebuild kits
Disc brake conversions - complete or parts
-
That is good to hear! I have a couple of steering racks here if you want them send me a PM.
Cheers
Jock
-
Hi Guys, You may want to add this to your "shop" list. I'm getting Beddie to HQ wheel adaptors made for ours in the new year, will let you know the cost when I've got it!
cheers Brian O
-
i will be interested in a few things when this gets up and running.
my front end must have new components and if i use the hq front disk parts that come with the van then i will be looking at changing the back to hq as well (so i don't have to carry two spares).
this is a great idea and will be a great resource!
-
Ok I've nearly finished the website, just a few little things to finish off.
I'm now looking for stock, what to you have spare - steering racks, upper and lower control arms, cross members etc. Let me know please.
Cheers
Craig
0413 799 447
-
now that works finished (2-2-09) I will have some more time and interest on the interior side of things, was hoping to make molded trims, dashes, molded roof linings, o/head consoles, etc. will look into it more..in the near future .
-
any progress on the CF shop?
-
Hi Guys, You may want to add this to your "shop" list. I'm getting Beddie to HQ wheel adaptors made for ours in the new year, will let you know the cost when I've got it!
cheers Brian O
g'day ben how did you go with the wheel adaptprs would like a set myself let me know if you can get them thanks
-
nah im not doing the wheel adaptors. not after merlin said he knew someone lost an axel with those adapters.
sorrry but shop wont be opening now, craig not too well.
cheers
ben