BUGA Community

Classifieds => For Sale => Topic started by: aka5000 on August 24, 2009, 11:55:35 AM

Title: bedford parts (melb)
Post by: aka5000 on August 24, 2009, 11:55:35 AM
calliper mounts for front disc set up, suit ford callipers $100

gas tank apa140, not exactly sure on capacity, about 100litres i think, 1400x330mm, suit truck or ute (out of date) $150

bedford spare stock wheel, 2 patterns, good tread $30

cfs fuel tank with straps, filler neck and cap $50

m20 4 spd gearbox, suit rebuild/parts $50

good condition m20 4 spd includes bellhousing, shifter and linkages $250

complete front and rear drum brakes, master and booster $50

350 holley carb, rebuilt half year ago, new bowl and flowt, needle & seat, jets, all new gaskets etc, missing base plate (butterflies, throttle linkages) used for gas conversion. $80 may be able to source base plate for interested buyer for whatever it costs

box of bedford stuff speedo cable, handbrake cable, stub axles, air filter housing etc etc

thinking about parting with my dragway indies, 4x 14x8, 2x yokohama 265/50/14 (few months old) & 2x sumitomo 245/50/14 about 90% tread. taking offers

im in east brighton victoria, about 20 min sth east of melb
0413 898 803
alex










Title: Re: bedford parts (melb)
Post by: ShaneJ on August 24, 2009, 12:40:38 PM
What disk and callipers do the brackets suit?
Title: Re: bedford parts (melb)
Post by: Hashman on August 24, 2009, 02:29:56 PM
might grab the drums of you.  are the cylinders ok?

also you dont have a clutch cable to suit a 4 speed do you?
Title: Re: bedford parts (melb)
Post by: aka5000 on August 24, 2009, 08:58:37 PM
hi shane the discs that i had with them were ford pattern, or leyland maybe, pretty sure their the same. never had the callipers, ben would prob know know coz i got them off him awhile ago

hashman as far as i can remember the cylinders were fine, but will have a look tomorrow

alex

Title: Re: bedford parts (melb)
Post by: ben on August 25, 2009, 08:12:07 AM
i still have the callipers to suit. i have grinded them to try to fit hq stuff but wont fit.

ben
Title: Re: bedford parts (melb)
Post by: aka5000 on August 29, 2009, 09:48:40 PM
Hey mate cylinders are ok, brakes were working fine when removed. Let's us know if ya still keen

Anybody want this stuff, offers welcome

Alex
Title: Re: bedford parts (melb)
Post by: Hashman on August 29, 2009, 10:21:44 PM
alex yeh ill take the drums!  will pm ya my mobile.. my cylinders a weeping and may need replacing for rwc so consider them sold :)
Title: Re: bedford parts (melb)
Post by: ben on August 30, 2009, 02:34:41 PM
sorry to hijack your post alex but i have some bedford parts for sale. trying to raise enough funds to get me through the next few weeks lol.

perfect barn doors....$200 the pair

perfect front doors....$250 a pair.  got 2 sets available.

perfect standard grill...$100. 2 available

really nice commadore seats i think someone said they have seat warmers in them,... $250 for the pair

wrecked 4 bedfords, got 3 more here.

0419529677

ben




Title: Re: bedford parts (melb)
Post by: able on September 28, 2009, 07:22:19 PM
Quote
good condition m20 4 spd includes bellhousing, shifter and linkages $250

i already have 2 m20,s 2 shifters and bellhousing... you still have the shifter and linkages?

if so would you sell the linkages or shifter and linkages separate?

do you have a pic of them?

are they bedford conversion linkages or just standard?
Title: Re: bedford parts (melb)
Post by: ben on September 28, 2009, 07:49:11 PM
if alex doesnt have them i have bedford shifter linkages for an holden 4 speed

cheers
ben
Title: Re: bedford parts (melb)
Post by: able on September 28, 2009, 08:08:22 PM
done! thanks ben.
SimplePortal 2.3.7 © 2008-2025, SimplePortal