BUGA Community
Technical => Driveline => Topic started by: ggas250 on August 19, 2009, 08:38:50 PM
-
Hey Rothu you mentioned you fitted the larger commodore 3 core radiator to your beddy. What model was it from and was it a 6 or a V8.
Cheers Wayne
-
It was a 3 core cross flow from a 6 cylinder later model commodore. I originally got a 2 core cross flow from Centre Road Wreckers which worked fine even through the summer, and I've still got that if you want it.
The 3 core I got off ebay from a guy who was wrecking a commodore. Dunno which one. It's basically brand new.
It just fits in at 670mm wide. Make sure the hose outlets are on the right sides!
I had to separate the wire loom to move it up out of the way of the radiator.
I also cut a section of the plate that is in front of the radiator which is the entire reason for Bedfords overheating.
-
another thing you can do it turn the thormostat houseing around so it faces the opposite direction if you have the also.
ben
-
O.K. how much do you want for the 2 core radiator as mine is shot and has to be replaced anyway?
Cheers Wayne