BUGA Community
Technical => Buying a Bedford => Topic started by: Dazz on January 15, 2015, 09:51:59 PM
-
Hi All,
Trying to find my old van that I sold 7 years ago to a Michael Troeth from Brunswick I think. I had 3/4 finished it from a bomb of a starter but had to get a wheelchair for our disabled daughter. I just want to see how it is now. It was a SWB Metalic Blue Green CF Beddie with a mild 351 Ford Windsor in it. Everything was either chromed or painted and needed full inside done. Was set up for a XC GT dash. Had a tricked FMX auto & chromed 9"diff. 12 slotter wheels with big Mickey Thompsons on the rear. Flush door handles, trick bonnet scoop,full skin rear door, teardrop bubble side windows, sunroof,WB Tailights & XC grille,XC Headlights, braided piping, hidden wiring, BM Shifter and single 2.5" exhaust. Ph Dazz on 0400 955 919 or post message.
I was hoping to see it at a van show but havent yet?
-
Hey dazz, sounds awesome, do you have any pics of it when you had it.
george
-
Trying to put pic up. Dazz
-
As far as i know (only from previous posts on here) the same guy still has it. You did some mighty fine work on that van.
-
Yes remember this one well, Craig nearly bought it......still waiting for it to surface ourselves, it's not even shown up here Dazz, top job too By the way, was awesome!
-
Thanks guys. If you see the guy can u get him to contact me.
Some more pics.
-
Nice van Dazz , l hope you get to see it again . I live one suburb over
from Brunswick and have not seen it around . If i do i will let you know
and ask the owner about quest to see your old Beddy.
I have one question , what type of heater fan have you used ?
Thanks Frank
-
Awsome looking van,
First time ive seen this one.
Love to own it.
-
http://www.buga.com.au/index.php?topic=5978.msg45353#msg45353 (http://www.buga.com.au/index.php?topic=5978.msg45353#msg45353)
-
Ive seen a few with holden HQ,
They look ok.
-
Hi Frank,
Out of all the things I modified, I cannot remember what the heater fan was off??. I remember finding it on a car at Pick aPart for $5, painted it and made the plate and chromed it. The wiring harness for the whole van was XC and I cut a hole in the heater box and mounted the heater fan resistor. Worked great. It might of even been a Morris or something??